×
Bayliner Owners Club on Facebook and Twitter (18 Feb 2018)

Over 440 members and growing on our Facebook Group - www.facebook.com/groups/BaylinerOwnersClub/
Lots of Information and daily posts from members just like you !
Your can also join our 1,235 members on Twitter, twitter.com/baylinerowners

× Technical Discussions

Sunray Swim Platform Rebuild

  • David
  • David's Avatar Topic Author
  • Offline
  • Admiral - Administrator
More
6 years 1 week ago #640 by David
David replied the topic: Re: Sunray Swim Platform Rebuild
Thannks Craig. I do have a welder although my skills are a little lacking. I think that is my only option. Hopefully the welds hold and I dont fall off into the water with the ladder in my hand :ohmy:

David
1990 Sunray Infinity
Twin 5.7 Cobra's

Please Log in or Create an account to join the conversation.

  • David
  • David's Avatar Topic Author
  • Offline
  • Admiral - Administrator
More
6 years 1 week ago #641 by David
David replied the topic: Re: Sunray Swim Platform Rebuild
I might have to give that a try although it may add more weight to the platform.

David
1990 Sunray Infinity
Twin 5.7 Cobra's
The following user(s) said Thank You: dmcb

Please Log in or Create an account to join the conversation.

More
6 years 1 week ago #642 by dmcb
dmcb replied the topic: Re: Sunray Swim Platform Rebuild
As you know stainless welding requires different skills.
Could you countersink the hole for the nuts, fiberglass the cut and let a washer spread the load?

Doug

Please Log in or Create an account to join the conversation.

  • David
  • David's Avatar Topic Author
  • Offline
  • Admiral - Administrator
More
6 years 1 week ago #722 by David
David replied the topic: Re: Sunray Swim Platform Rebuild
Worked some more on the swim platform this weekend. We removed the caulking from the substructure on the boat and I installed the first layer of marine plywood to the skin of the platform. I also found a little time to take the big step and drill a 2 3/8 hole through the transom for the Perko underwater light :ohmy:















David
1990 Sunray Infinity
Twin 5.7 Cobra's

Please Log in or Create an account to join the conversation.

  • David
  • David's Avatar Topic Author
  • Offline
  • Admiral - Administrator
More
6 years 20 hours ago #792 by David
David replied the topic: Re: Sunray Swim Platform Rebuild
The first layer of wood core is nicely cured and I cut out the hatch opening today. This will allow me to reach under the platform and bolt the platform to the substructure without having to go through the engine compartment like a contortsionist












David
1990 Sunray Infinity
Twin 5.7 Cobra's
Attachments:

Please Log in or Create an account to join the conversation.

  • Not Allowed: to create new topic.
  • Not Allowed: to reply.
  • Not Allowed: to add attachements.
  • Not Allowed: to edit your message.
Moderators: kingstonal
Time to create page: 0.726 seconds
Powered by Kunena Forum